| Main Page |
|
up-dated 06/02/10 | Shopping Cart | Primary News |
| Company Policy | Retail Store | ||
What's
|
On Line Catalog | Monthly Specials | Contact Us |
| Main Page |
|
up-dated 06/02/10 | Shopping Cart | Primary News |
| Company Policy | Retail Store | ||
|
What's
|
On Line Catalog | Monthly Specials | Contact Us |
Consists of a barbed nipple and swivel nut. Bulkhead Adapter
The bulkhead adapter allows you to easily run gas line through the walls of a
refrigerator.
Bulkhead Adapter - 4 inch long with 1/4" flare fittings.
Hose Adapter Flare Fitting - 3/16" ID Hose
HOS-AS
$1.29
0.1 shipping weight
Hose Adapter Flare Fitting - 5/16" ID Hose
HOS-AL
$3.69
0.1 shipping weight
The barbed nipple inserts through the swivel
nut into draft hose.
These fittings can be used with 3/16” or 1/4” I.D. tubing.
Stainless Steel
The bulkhead consist of of huts and washers to secure the bulkhead in position. Requires
a 1/2 inch hole. It has 1/4 inch flare ends that allow for the attachment of our 1 foot
and 2 foot jumper lines.
Bulkhead Adapter - 3 inch long with 1/4" flare fittings.
USE on a frig wall that is less than 1 and 3/8 inches thick.
Use a
Shank Brush
to clean between batches.
#14MF-BH-3
USE on a frig wall that is less than 2 and 3/8 inches thick.
#14MF-BH-4
Your Price $8.05
0.2 shipping weight
"T" with three (3) 1/4 inch male flare ports.
#14MFX3-B
Your Price $2.59
0.1 shipping weight
Brass Cross with four (4) 1/4 inch male flare ports.
#14MFX4-B
Your Price $6.19
0.1 shipping weight
#14FF-C $0.89 0.05 shipping
weight
#14MF-P $0.89 0.05 shipping
weight
Home Page
Shopping Cart
On Line Catalog
Monthly Specials
Order Line 800.365.2739
Advice Line 704.527.2337
This page, and all contents, are Copyright © 1973... 2009
by Ale an' Artifacts, Ltd.