Single-Gauge CO2 Regulator
with 5/16" pit-cock gas connection

  Consists of a line pressure gauge ONLY.

The line pressure gauge will register up to 60 PSI and indicates the dispensing/force carbonation pressure. With the 60 PSI line pressure gauge, you have greater control when force carbonating.

The port for the tank pressure gauge is attached with a plug. This will allow for the gauge to be added later if desired.

The 5/16" pit-cock has a built in check valve and a built in barb to which the gas line will be attached.

  Consists of a line pressure gauge and a tank pressure gauge.

The line pressure gauge will register up to 30 PSI and indicates the dispensing/force carbonation pressure.

The tank pressure gauge, which measures the pressure of CO2 in the CO2 tank. This pressure will remain constant until all the liquid CO2 is exhausted and start to noticably drop as the remaining CO2 is being used - giving you warning that the tank needs to be refilled. The tank pressure gauge will stabilize based on the temperature and altitude at between 620 PSI and 750 PSI normally.

The 1/4" male flair regulator check valve includes with a tapered washer.

Regulator Washer

Prevents gas leaks at the connection of the regulator to the CO2 tank.

Fits inside of the attachment nut of the regulator.